Revive Finishing Polish is a formula with light abrasives to cut down on damaged or swirled clear coat or single stage paint to reveal a fresh scratch free surface.
HOW TO APPLY
Apply Revive Finishing Polish (3 pea sized dots) by dual action, random orbital, or rotary polisher.
Set machine to medium-high speed and work until polish turns clear. Wipe off with a premium microfiber towel. Work until results are achieved.
Tip: If scratches or swirls don't come out, step up to a higher abrasive product such as our Delete Swirl and Defect Remover.
COMMONLY ASKED QUESTIONS
Does Revive Finishing Polish have fillers or wash away?
Revive does not have fillers. It permanently removes clear coat/single stage paint to reveal a fresh clean surface.
Should I clay bar before polishing with Revive Finishing Polish?
It is critical to clay your paint before polishing as embedded contaminants from your paint's surface can go into your pad and cause paint marring/swirls.
How do I make sure the scratches or swirls don't come back?
To prevent scratches and swirls from coming back, wash and dry with correct/safe procedures (Two Bucket Method). Also be sure to wax or seal your paint with our Illuminate Hybrid Wax Sealant. This will create an invisible layer of protection.
What pads should I use with Revive Finishing Polish?
Our recommendation is a medium-heavy polishing pad such as our Maroon 6" Polishing Pad. If your pad is too soft, it will not cut swirls, scratches, or oxidation out.
How many cars can I do with Revive Finishing Polish?
You will be able to correct over 3 full sized vehicles with this Revive Finishing Polish. It is extremely economical, meaning it only takes a little to polish out one panel. This sized bottle is 16 ounces.